ZyXEL P-870H-53A v2 User Guide - Page 106
Additional Wireless Terms, Wireless Security Overview
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 7 Wireless LAN • Every device in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 7.10.2 Additional Wireless Terms The following table describes some wireless network terms and acronyms used in the ZyXEL Device's Web Configurator. Table 33 Additional Wireless Terms TERM RTS/CTS Threshold DESCRIPTION In a wireless network which covers a large area, wireless devices are sometimes not aware of each other's presence. This may cause them to send information to the AP at the same time and result in information colliding and not getting through. By setting this value lower than the default value, the wireless devices must sometimes get permission to send information to the ZyXEL Device. The lower the value, the more often the devices must get permission. Preamble Authentication Fragmentation Threshold If this value is greater than the fragmentation threshold value (see below), then wireless devices never have to get permission to send information to the ZyXEL Device. A preamble affects the timing in your wireless network. There are two preamble modes: long and short. If a device uses a different preamble mode than the ZyXEL Device does, it cannot communicate with the ZyXEL Device. The process of verifying whether a wireless device is allowed to use the wireless network. A small fragmentation threshold is recommended for busy networks, while a larger threshold provides faster performance if the network is not very busy. 7.10.3 Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network. 7.10.3.1 SSID Normally, the ZyXEL Device acts like a beacon and regularly broadcasts the SSID in the area. You can hide the SSID instead, in which case the ZyXEL Device does not broadcast the SSID. In addition, you should change the default SSID to something that is difficult to guess. 106 P-870H/HW Series User's Guide