ZyXEL P-870H-53A v2 User Guide - Page 25
The RESET Button - password
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 1 Introducing the ZyXEL Device None of the LEDs are on if the ZyXEL Device is not receiving power. Table 1 LED Descriptions LED POWER ETHERNET 1-4 WLAN/ WPS DSL INTERNET COLO R Green Red STATUS On Blinking On Off Green On Blinking Off Green On Blinking Orange Blinking Off Green On Blinking Off Green On DESCRIPTION The ZyXEL Device is receiving power and ready for use. The ZyXEL Device is self-testing. The ZyXEL Device detected an error while self-testing, or there is a device malfunction. The ZyXEL Device is not receiving power. The ZyXEL Device has an Ethernet connection with a device on the Local Area Network (LAN). The ZyXEL Device is sending/receiving data to /from the LAN. The ZyXEL Device does not have an Ethernet connection with the LAN. The wireless network is activated and is operating in IEEE 802.11b/g mode. The ZyXEL Device is communicating with other wireless clients. The ZyXEL Device is setting up a WPS connection. The wireless network is not activated. The DSL line is up. The ZyXEL Device is initializing the DSL line. The DSL line is down. The ZyXEL Device has an IP connection but no traffic. Red On Off Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used) and the DSL connection is up. The ZyXEL Device attempted to make an IP connection but failed. Possible causes are no response from a DHCP server, no PPPoE response, PPPoE authentication failed. The ZyXEL Device does not have an IP connection. Refer to the Quick Start Guide for information on hardware connections. 1.6 The RESET Button If you forget your password or cannot access the Web Configurator, you will need to use the RESET button at the back of the device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to "1234". P-870H/HW Series User's Guide 25