ZyXEL P-870H-53A v2 User Guide - Page 215
Table 86
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Chapter 22 Logs To change your ZyXEL Device's log settings, click Maintenance > Logs > Log Settings. The screen appears as shown. Figure 130 Maintenance > Logs > Log Settings The following table describes the fields in this screen. Table 86 Maintenance > Logs > Log Settings LABEL Active Log Level DESCRIPTION Select to enable or disable system logging. Select the severity level of the logs that you want the ZyXEL Device to display, record and send to the log server. Mode The ZyXEL Device displays and records the logs with the severity level equal to or higher than what you selected. Select Local to record the logs and store them in the local memory of the ZyXEL Device only. Select Remote to send logs to the specified log server. Syslog Server IP Address Syslog Server UDP Port Apply Select Both to record the logs and store them in the local memory and also send logs to the log server. Enter the server name or the IP address of the log server. Enter the UDP port of the log server. Click Apply to save your customized settings. P-870H/HW Series User's Guide 215