ZyXEL P-870H-53A v2 User Guide - Page 126
Trigger Port Configuration
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Chapter 8 Network Address Translation (NAT) Table 39 NAT Trigger Port (continued) LABEL Server Name WAN Interface Trigger Start Port Trigger End Port Trigger Proto. Open Start Port Open End Port Open Proto. Modify DESCRIPTION This field displays the name of the service used by the packets for this virtual server. This field displays the WAN interface through which the service is forwarded. This is the first trigger port number that identifies a service. This is the last trigger port number that identifies a service. This is the trigger IP protocol. 1 means TCP, 2 means UDP and 3 means TCP/UDP. This is the first open port number that identifies a service. This is the last open port number that identifies a service. This is the open IP protocol. 1 means TCP, 2 means UDP and 3 means TCP/UDP. Click the Edit icon to go to the screen where you can edit the rule. Apply Cancel Click the Remove icon to delete an existing rule. Note that subsequent rules move up by one when you take this action. Click Apply to save your changes back to the ZyXEL Device. Click Cancel to return to the previous configuration. 8.5.1 Trigger Port Configuration This screen lets you create new port triggering rules. Click the Add icon in the NAT - Trigger Port screen to open the following screen. Figure 69 NAT > Trigger Port > Add 126 P-870H/HW Series User's Guide