ZyXEL P-870H-53A v2 User Guide - Page 203
Overview, The Interface Group Screen
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
CHAPTER 20 Interface Group 20.1 Overview By default, all LAN and WAN interfaces on the ZyXEL Device are in the same group and can communicate with each other. You can create multiple groups to have the ZyXEL Device assign the IP addresses in different domains to different groups. Each group acts as an independent network on the ZyXEL Device. 20.1.1 What You Can Do in this Chapter The Interface Group screen lets you create multiple networks on the ZyXEL Device (Section 20.2 on page 203). 20.2 The Interface Group Screen You can manually add a LAN interface to a new group. Alternatively, you can have the ZyXEL Device automatically add the incoming traffic and the LAN interface on which traffic is received to the new group when its source MAC address or DHCP option information matches the predefined filtering criteria. Use the LAN screen to configure the private IP addresses the DHCP server on the ZyXEL Device assigns to the clients in the default and/or user-defined groups. If you set the ZyXEL Device to assign IP addresses based on the client's source MAC address or DHCP option information, you must enable DHCP server and configure LAN TCP/IP settings for both the default and user-defined groups. See Chapter 6 on page 77 for more information. P-870H/HW Series User's Guide 203