ZyXEL P-870H-53A v2 User Guide - Page 154
The Static Route Screen
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Chapter 12 Static Route 12.2 The Static Route Screen Click Advanced > Static Route to open the Static Route screen. Figure 87 Advanced > Static Route The following table describes the labels in this screen. Table 57 Advanced > Static Route LABEL # Active DESCRIPTION This is the number of an individual static route. This field indicates whether the rule is active or not. Destination Netmask Gateway Interface Remove Add Apply Clear the check box to disable the rule. Select the check box to enable it. This parameter specifies the IP network address of the final destination. Routing is always based on network number. This parameter specifies the IP network subnet mask of the final destination. This is the IP address of the gateway. The gateway is a router or switch on the same network segment as the device's LAN or WAN port. The gateway helps forward packets to their destinations. This is the WAN interface through which the traffic is routed. Click the icon to remove a static route from the ZyXEL Device. A window displays asking you to confirm that you want to delete the route. Click this to create a new rule. Click this to apply your changes to the ZyXEL Device. 154 P-870H/HW Series User's Guide