ZyXEL P-870H-53A v2 User Guide - Page 158
Policy Forwarding Setup
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Chapter 13 Policy Forwarding The following table describes the labels in this screen. Table 59 Advanced > Policy Forwarding LABEL DESCRIPTION Policy Name This is the name of the rule. SourceIP This is the source IP address. Protocol This is the IP protocol. SourcePort This is the source port number. SourceMAC This is the source MAC address. Interface This is the WAN interface through which the traffic is routed. Remove Click the icon to remove a rule from the ZyXEL Device. A window displays asking you to confirm that you want to delete the rule. Add Click this to create a new rule. 13.2.1 Policy Forwarding Setup Click the Add button in the Policy Forwarding screen. Use this screen to configure the required information for a policy route. Figure 90 Policy Forwarding: Add The following table describes the labels in this screen. Table 60 Policy Forwarding: Add LABEL Policy Name DESCRIPTION Enter a descriptive name of up to 16 printable English keyboard characters, including spaces. Source IP Address Enter the source IP address. Protocol Select the IP protocol (TCP or UDP). Source Port Enter the source port number. Use Interface Select a WAN interface through which the traffic is sent. You must have the WAN interface(s) already configured in the WAN screens. Back Click Back to return to the previous screen without saving. 158 P-870H/HW Series User's Guide