ZyXEL P-870H-53A v2 User Guide - Page 61
Service Type
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 5 WAN Setup The following table describes the labels in this screen. Table 12 WAN Configuration: WAN Interface LABEL DESCRIPTION Select a layer 2 interface for this service Select ptm0 to use the DSL port as the WAN port for this connection. Back Click this button to return to the previous screen. Next Click this button to continue. 5.5.1.2 Service Type Figure 32 WAN Configuration: Service Type The following table describes the labels in this screen. Table 13 WAN Configuration: Service Type LABEL Select WAN service type DESCRIPTION Select the method of encapsulation used by your ISP. Choices are PPP over Ethernet (PPPoE), IP over Ethernet and Bridging. Enter Service Description Specify a name for this connection or use the automatically generated one. Rate Limit Enter the maximum transmission rate in Kbps for traffic sent through the WAN connection. Otherwise, leave this field blank to disable the rate limit. Tag VLAN ID for egress packets Select this option to add the VLAN tag (specified below) to the outgoing traffic through this connection. This field is available when the PTM interface is in VLANMUX mode. P-870H/HW Series User's Guide 61