ZyXEL P-870H-53A v2 User Guide - Page 180
Table 70
View all ZyXEL P-870H-53A v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Chapter 17 Remote Management Click Advanced > Remote MGMT to open the following screen. Use this screen to configure your P-870HA to be managed by an ACS. Figure 99 TR-069 180 The following table describes the fields in this screen. Table 70 TR-069 LABEL DESCRIPTION Inform Select Enable to activate remote management via TR-069 on the WAN. Otherwise, select Disable. Inform Interval Enter the time interval (in seconds) at which the ZyXEL Device sends information to the auto-configuration server. ACS URL Enter the URL or IP address of the auto-configuration server. ACS User Name Enter the TR-069 user name for authentication with the autoconfiguration server. ACS Password Enter the TR-069 password for authentication with the autoconfiguration server. WAN Interface used by TR-069 client Select a WAN interface through which the TR-069 traffic passes. Display SOAP messages on serial console Select Enable to show the SOAP messages on the console. Connection Request Authentication Select this option to enable authentication when there is a connection request from the ACS. Connection Request User Name Enter the connection request user name. When the ACS makes a connection request to the ZyXEL Device, this user name is used to authenticate the ACS. P-870H/HW Series User's Guide