ATI X1300 User Guide - Page 18
If your computer has an on-board graphics capability, you may, your computer.
UPC - 727419412872
View all ATI X1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
10 Advanced Installation: AGP 4 Power Cable Connector 5 4-Pin Power Connection 6 Power Extension Cable: Power Connector to Graphics Card 7 Power Extension Cable: Power Connector to Hard Drive 8 Power Extension Cable: Power Connector to Power Supply 9 Hard Drive 10 Power Connector to Hard Drive Installing the graphics card 1 Turn off the computer, monitor, and other peripheral devices. 2 Unplug the computer's power cord and disconnect all cables from the back of your computer. L WARNING - Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard to avoid possible damage to the motherboard. 3 Remove the computer cover. If necessary, consult your computer's manual for help in removing the cover. L WARNING - Remember to discharge your body's static electricity by touching the power supply or the metal surface of the computer chassis. 4 Unscrew or unfasten and remove any existing graphics card from your computer. Note: If your computer has an on-board graphics capability, you may need to disable it on the motherboard. For more information, see your computer documentation. 5 Locate the appropriate slot and, if necessary, remove the metal back- plate cover.