Canon imageCLASS D1150 imageCLASS D1180/D1170/D1150/D1120 Basic Operation Guid - Page 145
Switching Temporarily to Tone Dialing, Dial the recipient's fax number.
View all Canon imageCLASS D1150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Sending Fax Documents 1 Connect an external telephone to the machine if you want to talk to the recipient before sending a document. For information on how to connect an external telephone to the machine, see "Make Fax Settings," in the Starter Guide or "Connect Telephone Cables," in the e-Manual. 2 Place documents in the ADF. 7 Dial the recipient's fax number. - Make sure to confirm the dial tone before entering a fax number. If you enter the number before the dial tone is heard, the call may not connect, or the wrong number may be dialed. - If in in is set to and you specify a fax number using - , [numeric keys] and [Tone], you must enter the fax number again for confirmation. Enter the same fax number you entered in step 7, then press [OK]. 3 Press [SEND/FAX]/ [FAX]. 4 Press [SEND/FAX] repeatedly to select , then press [OK]. FAX SELECT:OK For the D1150, skip this step. 5 Adjust any necessary settings for your documents. For details, see "Adjusting Density," on p. 6-29, "Selecting Image Quality," on p. 6-30, and "2Sided Documents," on p. 6-31. 6 Press [Hook] or pick up the handset of your external telephone. If you press [Hook], you can temporarily adjust the monitor tone volume with and . After adjusting the volume, press [OK]. 8 Talk through the handset to the recipient. - If you press [Hook] in step 6, you can pick up the handset when you hear the recipient's voice. - If you hear a high-pitched signal instead of the recipient's voice, skip to step 10. 9 Ask the recipient to set their fax machine to receive faxes. 10 When you hear a high-pitched signal, press [Start], then hang up the handset. Scanning starts, and the scanned data is sent to the specified destination when scanning is complete. Switching Temporarily to Tone Dialing If your machine is set for pulse dialing, follow the procedure below to switch to tone dialing to use information services (e.g., banks, airline reservations, and hotel reservations). To talk to the other party, you will need to connect an external telephone to the machine. 1 Press [SEND/FAX]/ [FAX]. Fax (D1180/D1170/D1150) 6-14