Dell 5330dn Workgroup User's Guide - Page 15
Settings
View all Dell 5330dn Workgroup manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3.Settings Setup Use this menu selection to configure a variety of printer features. Menu selection: Purpose: Values: Language Determines the text language displayed on the operator panel. English Deutsch After selecting each item, the page will print, and the printer will return to Ready. Espanol FRANCAIS Italiano Power save Specifies the number of minutes the printer waits after a job is printed before it goes into a reduced power state. Nederlands 5 min 10 min 15 min 30 min 60 min 120 min Specifies the number of minutes after a print job before the printer goes into Power Save mode. (Your printer may not support the entire range of values.) The factory default Power Save setting depends on your printer model. Print the menu settings page to determine the current Power Save setting. When the printer is in Power Save mode, it is still ready to receive print jobs. Altitude Adjust Optimizes print quality according to your altitude. Plain High Higher Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time. l Plain: 0 m ~ 1,000 m l High: 1,000 m ~ 2,000 m l Higher: 2,000 m ~ 3,000 m l Highest: 3,000 m ~ 4,000 m Timeout Print Recovery Specifies the amount of time (in seconds) the printer waits to return to the home screen, receive an end-of-job message, or receive additional bytes of data from the computer. NOTE: Wait Timeout is only available when you use PostScript emulation. This menu value has no effect on PCL emulation print jobs. Highest Print Time Out 15, 30, 60, 90*, 180 Auto Continue On Off 15-180 - Specifies the amount of time the printer waits for an endof-job message before canceling the remainder of the print job. When the timer expires, any partially formatted page still in the printer is printed, and other input ports are examined to see if data exists. 90* is the default setting. Determines whether or not the printer continues printing when it detects the paper unmatched to your paper setting. l On: If the paper mismatch occurs, an error message will display. The printer goes offline for 30 seconds, then automatically clears the message and continues printing. l Off: If a paper mismatch occurs, an error message remains on the display, and the printer remains offline until you insert the correct paper. Jam Recovery On Off Specifies whether the printer reprints jammed pages. l On: Printer reprints jammed pages. l Off: Printer does not reprint jammed pages. Auto CR Allows you to append the LF Refers to the following samples: