Dell 5330dn Workgroup User's Guide - Page 78

Printing to the Rear Door, Printing to the Optional Output Expander

Page 78 highlights

Standard bin 250 sheets of 75 g/m2 plain paper Plain paper up to 163 g/m2, Envelopes (Short edge Feed Only), Labels. N/A - One is standard on the printer and located on the top of the printer. Output expander-bin 1 600 sheets of 75 g/m2 paper Plain paper up to 163 g/m2 1 For information on installing an output expander, see "Installing an Output Expander." NOTE: For printing to the Standard bin, Output Expander and Duplexer, close the rear output tray. Use the rear output tray only for special media, such as like envelope, labels and transparencies. If necessary, expand the paper output extension to prevent print media from falling off the output tray. Printing to the Rear Door (face up) When using the rear door, paper comes out of the printer face up. Printing from the Multi-purpose Feeder to the rear door provides a straight paper path. Using the rear door might improve the output quality with special materials. To use the rear door: Open the rear door by pulling it down. CAUTION: The fuser area inside the rear door of your printer becomes very hot when in use. Use caution when accessing this area. Printing to the Optional Output Expander (face down) You can increase the paper output capacity of your printer by installing an Output Expander. An Output Expander holds 600 sheets of plain paper. See "Installing an Output Expander." for installation instructions. NOTE: Paper with a smaller size of width of 3"(76.2mm) and length of 5.82"(148.5mm) cannot be print out in the ouput expander.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127

If necessary,
expand the paper output extension to prevent print media from falling off the
output tray
.
Standard bin
250 sheets of 75 g/m
2
plain paper
Plain paper up to 163
g/m
2
, Envelopes (Short -
edge Feed Only), Labels.
N/A - One is standard on
the printer and located on
the top of the printer.
Output expander-bin 1
600 sheets of 75 g/m
2
paper
Plain paper up to 163
g/m
2
1
For information on
installing an output
expander, see
"Installing
an Output Expander."
NOTE:
For printing to the Standard bin, Output Expander and Duplexer, close the rear output tray. Use the rear output tray only for special media, such
as like envelope, labels and transparencies.
Printing to the Rear Door
(face up)
When using the
rear door
, paper comes out of the printer face up.
Printing from the
Multi-purpose Feeder
to the
rear door
provides a
straight paper path
. Using the
rear door
might improve the output quality with special
materials.
To use the
rear door
:
Open the
rear door
by pulling it down.
CAUTION:
The fuser area inside the rear door of your printer becomes very hot when in use. Use caution when accessing this area.
Printing to the Optional Output Expander
(face down)
You can increase the paper output capacity of your printer by installing an
Output Expander
. An
Output Expander
holds 600 sheets of plain paper. See
"Installing an Output Expander."
for installation instructions.
NOTE:
Paper with a smaller size of width of 3"(76.2mm) and length of 5.82"(148.5mm) cannot be print out in the ouput expander.