Dell 5330dn Workgroup User's Guide - Page 21
Accessing Operator Panel Menus
View all Dell 5330dn Workgroup manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
PCL This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and font size. Menu selection: Purpose: Values: PCL Sets the PCL emulation configuration: font type, symbol type, lines per page, and font size. Typeface PCL1 ~ PCL56 Select the standard font to be used in PCL emulation. l PCL1~PCL7's interval between letters is fixed, and PCL8~PCL45's interval is proportional to the font type and font size. Adjust the font size of PCL1~PCL7 using the Pitch item, and PCL8~PCL45 using the Point Size item. l PCL46~PCL56's interval and font size are fixed. Symbol ROMAN8 ~ OCR B Selects the symbol set to be used in PCL emulation. The symbol set is the group of numbers, marks, and special signs used when printing letters. Available symbol sets vary depending on the Typeface setting. Point Size 4.00 ~ 999.75 (0.25 unit) By selecting between PCL8 and PCL45 from the Typeface menu, you can determine the font size by setting the height of the characters in the font. Courier Regular, Dark Select the version of Courier font to use. Pitch 0.44 ~ 99.99 (0.01 unit) By selecting between PCL1 and PCL7 from the Typeface menu, you can determine the font size by setting the number of characters that will print in one horizontal inch of type. The default value 10 is the best size. Lines 5 ~ 128 Set vertical spacing from 5 to 128 lines for the default paper size. The default number of lines may differ according to the paper size and printing orientation. PostScript This menu provides you with the Print PS Error menu item. Menu selection: Purpose: Values: PostScript Provides the Print PS Error menu items. Print PS Error On Off Select whether or not your printer prints an error list when a PS error occurs. l On: Prints PS 3 emulation errors. If an error occurs, the job stops processing, the error message prints, and the printer flushes the job. l Off: The job is flushed without an indication of any error. Accessing Operator Panel Menus 1. Press Menu ( ). 2. Press Scroll ( to ) to highlight the desired setting and press Select ( ). 3. If the setting item has sub menus, repeat step 2. 4. Press Scroll ( to ) to access the required value. 5. Press Select ( ) to save the selection. 6. If you want to move to the upper level menus, press Select ( ). 7. Press Cancel ( ) to return to Standby mode.