Dell PowerEdge R910 Hardware Owner's Manual - Page 101
Installing a Memory Riser, Turn off the system, including any attached peripherals, and disconnect
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Figure 3-7. Removing and Installing a Memory Riser 1 2 3 5 4 1 handle 3 release button 5 memory-riser connector 2 memory riser 4 card guide Installing a Memory Riser 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 89. 3 If applicable, remove the memory-riser blank. See "Removing a MemoryRiser Blank" on page 99. CAUTION: Before installing the memory riser, you must ensure that the memory module socket ejectors are in the locked position. Installing System Components 101
Installing System Components
101
Figure 3-7.
Removing and Installing a Memory Riser
Installing a Memory Riser
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 89.
3
If applicable, remove the memory-riser blank. See "Removing a Memory-
Riser Blank" on page 99.
CAUTION:
Before installing the memory riser, you must ensure that the memory
module socket ejectors are in the locked position.
1
handle
2
memory riser
3
release button
4
card guide
5
memory-riser connector
1
3
2
4
5