Dell PowerEdge R910 Hardware Owner's Manual - Page 52
Warning: Memory, address, value
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Message Causes Corrective Actions Memory Initialization Warning: Memory size may be reduced. Invalid memory Ensure that the memory configuration. The system modules are installed in a will run but with less memory valid configuration. See than is physically available. "General Memory Module Installation Guidelines" on page 92. Memory odd/even logic failure at address, read value expecting value. Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 181. Memory write/read failure at address, read value expecting value. Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 181. Memory set to minimum frequency. The memory frequency may If not an intentional setting, be intentionally set lower for check any other system power conservation. messages for possible causes. The current memory Ensure that your memory configuration may support configuration supports the only the minimum frequency. higher frequency. See "General Memory Module Installation Guidelines" on page 92. Memory tests terminated by keystroke. POST memory test was Information only. terminated by pressing a key. 52 About Your System