Dell PowerEdge R910 Hardware Owner's Manual - Page 123
Integrated NIC Hardware Key
View all Dell PowerEdge R910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Integrated NIC Hardware Key TCP/IP Offload Engine (TOE) and iSCSI are enabled by default on the system. The integrated NIC hardware key is reserved for future use. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. NOTE: TOE operating system support and the Microsoft® scalable network pack are required for TOE functionality. 1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Open the system. See "Opening the System" on page 89. 3 Locate the iSCSI_KEY connector on the system board. See Figure 6-1. 4 Insert the NIC hardware key into the connector onto the board. See Figure 3-19. Installing System Components 123