Epson Expression 800 User Setup Information - Page 21

Set the SCSI ID Number The scanner is preset at the factory to SCSI ID 2. If you need to change this number, turn the scanner off. Then turn the SCSI ID switch on the back panel. Be sure to choose a unique number that doesn't conflict with the ID number of other SCSI devices. ON OFF UNLOCK LOCK OPTION TOENRMSINWATOR OFF SCSI ID 0 1 7 2 6 5 43 1 7 2 6 54 Don't use SCSI ID 7, which is usually reserved for the SCSI interface in the computer. SCSI ID 0 and 1 are also not recommended, as these may be used for the hard disk. If you select the asterisk (*), the scanner won't work. Use this setting when you need to prepare the scanner for transportation. For more information on selecting an ID number, see your electronic EPSON Expression 800 Reference Guide. If you're installing either the transparency unit or the auto document feeder, see "Installing the Transparency Unit" on page 46 or "Installing the Auto Document Feeder" on page 52. 14