Epson Expression 800 User Setup Information - Page 62

5. Slide the transportation lock at the back of the scanner to the LOCK position. UNLOCK LOCK If the carriage does not automatically return to the home position, slowly raise the front of the scanner and hold it UNLOCK LOCK OPTION TOENRMSINWATOR OFF SCSI ID 0 1 7 2 6 5 43 up until the carriage comes to rest in the home position. Then slide the transportation lock to the LOCK position. If you are using a transparency unit and it is switched on, the scanner carriage will not move to the home position. Remove the transparency unit first, then perform the steps above. See the next section for instructions. Transporting the Tranparency Unit After you've removed the transparency unit from the scanner, prepare it for shipping as follows: 1. Slowly raise the front of the transparency unit as shown to allow the lamp assembly to slide to the back of the unit. Wait until the lamp assembly comes to rest. 55