Epson LQ 1050 User Manual - Page 189
Print Size and Character Width, 1B 21
View all Epson LQ 1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
ESC ! Master Select Format: ASCII code: ESC ! n Decimal: 27 33 n Hexadecimal: 1B 21 n Comments: Selects any valid combination of the following modes: 10 pitch, 12 pitch, proportional, condensed, emphasized, double-strike, double-wide, italic, and underline. To determine n, add the values of the desired modes from the table below: Print Size and Character Width ESC P Select 10 Pitch Format: ASCII code: ESC P Decimal : 27 80 Hexadecimal: 1B 50 Comments: Selects 10 pitch (10 characters per inch). Because 10 pitch is the default pitch, this command is normally used to cancel 12 pitch or 15 pitch. ESC M Format: ASCII code: ESC M Decimal: 27 77 Hexadecimal: 1B 4D Comments: Selects 12 pitch (12 characters per inch). Select 12 Pitch 9-23
ESC !
Master
Select
Format:
ASCII code:
ESC
!
n
Decimal:
27
33
n
Hexadecimal:
1B 21
n
Comments:
Selects any valid combination of the following modes: 10 pitch,
12 pitch, proportional, condensed, emphasized, double-strike,
double-wide, italic, and underline. To determine
n,
add the
values of the desired modes from the table below:
Print Size and Character Width
ESC P
Format:
ASCII code:
ESC
P
Decimal :
27
80
Hexadecimal: 1B 50
Select 10 Pitch
Comments:
Selects 10 pitch
(10
characters per inch). Because 10 pitch is the
default pitch, this command is normally used to cancel 12 pitch
or 15 pitch.
ESC M
Select 12 Pitch
Format:
ASCII code:
ESC
M
Decimal:
27
77
Hexadecimal: 1B 4D
Comments:
Selects 12 pitch (12 characters per inch).
9-23