HP Designjet 2000/3000cp HP DesignJet 3000/3500 CP Printer User’s Gui - Page 240
Nozzle Print Test, Test Pattern 3, IMPORTANT, Problem, Corrective Action
View all HP Designjet 2000/3000cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Troubleshooting Solving Image-Quality Problems Problem See: Corrective Action 2 Different colors visible in the spaces between some or all of the columns (depending on the color of the printhead that is misaligned) This is an indication of vertical misalignment. Example C Refer to 11-20, Color Alignment Quality Test and verify this problem. See the recommended actions. NOTE:It is also possible that the banding was caused because you were using nonHP media. The performance of your printer can only be guaranteed if you use genuine HP media. Test Pattern 3: IMPORTANT Nozzle Print Test Use this test purely to confirm an error highlighted in Test Pattern 2:. Some of the printhead nozzle problems that you will see in this pattern do not mean you will not get perfect image quality results. The printer has internal corrections that will hide many nozzle defects. In this test all the 240 nozzles of each printhead are tested. For each of the four colors you will see the numbers 10 to 240 over the diagonally stepped lines in increments of 10. These numbers correspond to the nozzle number that prints each step. There are two printhead nozzle errors: n Nozzles not printing n Nozzles misdirected. 11-16