HP Designjet L26100 HP Designjet L26500 / L26100 printer series - Maintenance - Page 33

Replace the ink maintenance kit The ink maintenance kit contains the ink funnel, the ink tube assembly and the ink filter. The front panel prompts you when these components need to be replaced. NOTE: When you have removed the ink tube assembly, you cannot reuse it: you must install a new assembly. 1. Open the ink maintenance kit and remove the spare ink tube cap, which will be used to cover the end of the old ink tube. 2. On the printer's front panel, select the icon, then select Replace ink mainten. kit. 3. Pull the bottom of the ink tube assembly out of the printhead cleaning container. 4. Cover the end of the old ink tube with the spare cap from the ink maintenance kit, to prevent ink from falling out of the tube. 5. Unlock and open the window. Maintain hardware ENWW Replace the ink maintenance kit 27