HP Designjet L26100 HP Designjet L26500 / L26100 printer series - Maintenance - Page 40

5. Push down as indicated by the arrow. CAUTION: You might feel some resistance when installing the new printhead, so you need to press it down firmly but smoothly. You should hear a beep and see confirmation on the front-panel display that the printhead has been inserted. 6. Insert all of the other printheads that need to be installed, and close the carriage cover. 7. Make sure that the end of the latch catches the wire loop on the near side of the carriage. Maintain hardware 8. Lower the latch to rest on the carriage cover. When all of the printheads have been inserted correctly and the printer has accepted them, the printer beeps. NOTE: If the printer does not beep when you insert the printhead and the Replace message appears on the front-panel display, you might need to reinsert the printhead. 34 Chapter 4 Hardware maintenance ENWW