HP StorageWorks 1606 HP StorageWorks 8GB SAN Switch hardware reference guide ( - Page 22
FICON Accelerator for IBM TotalStorage z/OS Global Mirror aka, XRC and FICON Tape requires
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
• Fabrics connected through FCIP merge if the ports are configured as VE_Ports, and do not merge if one end of the connection is configured as a VEx_Port. If VE_Ports are used in a Fibre Channel Routing Services backbone fabric configuration, then the backbone fabric merges but the EX_Ports attached to edge fabrics do not merge. For more information, see the Fabric OS Administrator's Guide. • FCIP Trunking with load balancing and network-based failure recovery • Adaptive Rate Limiting • Configurable minimum and maximum committed bandwidth per FCIP tunnel • Minimum rate is guaranteed rate • FC Frame Compression before FCIP Encapsulation • FCR • SOTCP with reorder resistance • FastWrite over FCIP (not over FC) • Open Systems Tape Pipelining over FCIP • FCIP QoS • TCP Performance Graphing in Web Tools • FICON and FICON Cascading ready. • FICON CUP (requires an optional license). • FICON Accelerator for IBM TotalStorage z/OS Global Mirror (aka, XRC) and FICON Tape (requires an optional license). The 1606 Extension SAN Switch has the following hardware features: • Up to 16 Fibre Channel SFP ports supporting Fibre Channel Switching or Fibre Channel Routing Services, with link speeds of 1-, 2-, 4-, or 8-Gb/s • Up to 6 1-GbE ports supporting the FCIP and Fibre Channel Routing Services features, with transmit link speeds of up to 1-Gb/s on each port Two ports (ge0 and ge1) can be configured for use with either copper or optical cables • Rack-mountable 1U chassis • Two PowerPC 440EPx processors running at 667 MHz • One GoldenEye2 switch ASIC for 1, 2, 4, or 8 Gb/s FC switching • One Cavium CN5740 running with 8 MIPS cores at 750 MHz for data path processing • One Blaster FPGA for FC compression, offloads such as chksum generation/checks • One 10/100/1000 Base-T Ethernet port for the management interface • One RJ-45 terminal port • One USB port for storing firmware updates, supportSave command output, and configuration uploads and downloads • Two redundant, hot-swappable combined power supply/fan assembly FRUs • Five internal temperature sensors 22 HP StorageWorks 8-Gb SAN Switches