HP StorageWorks 1606 HP StorageWorks 8GB SAN Switch hardware reference guide ( - Page 84
Facility requirements, Table 19 8/80 SAN Switch, Encryption SAN Switch
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Table 18 8/8, 8/24 and 8/40 SAN Switch memory Memory type Main Memory (SDRAM) Boot Flash Compact Flash Install memory 512 MB 8/40 SAN Switch only: 4 MB 1 GB Table 19 lists the 8/80 SAN Switch, Encryption SAN Switch, and FCoE Converged Network Switch memory specifications. Table 19 8/80 SAN Switch, Encryption SAN Switch, and FCoE Converged Network Switch memory Memory type Install memory Main Memory (DDR2 SDRAM) Boot Flash Compact Flash 1 GB 4 MB 1 GB Table 20 lists the 1606 Extension SAN Switch memory specifications. Table 20 1606 Extension SAN Switch memory Memory type Install memory Main Memory (DDR2 SORDIMM SDRAM) Boot Flash Compact Flash 2 GB 4 MB 1 GB Facility requirements To ensure correct operation, the facility where the switch is in use must meet the requirements shown in Table 21. Table 21 Facility requirements Type Electrical Requirements 8/8, 8/24, 8/80, Encryption, and 1606 Extension SAN Switches-Primary AC input: 100-240 VAC, 2.0 A, 47-63 Hz; switch autosenses input voltage. 8/40 SAN Switch-Primary AC input: 90-264 VAC; switch autosenses input voltage. FCoE Converged Network Switch-Primary AC input: 85-264 VAC; input line frequency 47-63 Hz. Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the switch nameplate. Circuit protected by a circuit breaker and grounded in accordance with local electrical codes. Electrical interference less than the levels in the standards listed in Table 22. 84 Technical specifications