HP StorageWorks 1606 HP StorageWorks 8GB SAN Switch hardware reference guide ( - Page 56
-Gb SAN Switch LEDs, 8/8 and 8/24 SAN Switch LEDs
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4. Verify correct operation of the switch in the fabric by entering the fabricshow command from the workstation. This command provides general information about the fabric. 8-Gb SAN Switch LEDs System activity and status can be determined through the activity of the LEDs on the switch. The LED states are as follows: • No light • Steady light • Flashing light The LEDs are either green or amber. 8/8 and 8/24 SAN Switch LEDs 8/8 and 8/24 SAN Switch LEDs are located on the port side only. 1. System power LED (green) 2. System status LED (green/amber) 3. Link status LED 4. Link speed LED 5. Port status LED (port 3) 6. Port status LED (port 7) Figure 26 Identifying 8/8 and 8/24 SAN Switch LEDs . 56 Managing the 8-Gb SAN Switches
4.
Verify correct operation of the switch in the fabric by entering the
fabricshow
command from
the workstation.
This command provides general information about the fabric.
8-Gb SAN Switch LEDs
System activity and status can be determined through the activity of the LEDs on the switch. The LED
states are as follows:
•
No light
•
Steady light
•
Flashing light
The LEDs are either green or amber.
8/8 and 8/24 SAN Switch LEDs
8/8 and 8/24 SAN Switch LEDs are located on the port side only.
4. Link speed LED
1. System power LED (green)
5. Port status LED (port 3)
2. System status LED (green/amber)
6. Port status LED (port 7)
3. Link status LED
Figure 26 Identifying 8/8 and 8/24 SAN Switch LEDs
.
Managing the 8-Gb SAN Switches
56