HP StorageWorks 1606 HP StorageWorks 8GB SAN Switch hardware reference guide ( - Page 92
Boot, Supported HBAs and CNAs
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Boot Boot performs the following tasks after POST is complete: • Performs universal port configuration • Initializes links • Analyzes the fabric If any ports are connected to other switches, the switch participates in a fabric configuration. • Obtains a domain ID and assigns port addresses • Constructs unicast routing tables • Enables normal port operation Supported HBAs and CNAs NOTE: CNAs apply to the FCoE Converged Network Switch only. For a list of HBAs that have been tested and are known to work with the SAN switches, see the latest version of the HP StorageWorks SAN Design Reference Guide, at http://www.hp.com/go/ sandesignguide. 92 Technical specifications
Boot
Boot performs the following tasks after POST is complete:
•
Performs universal port configuration
•
Initializes links
•
Analyzes the fabric
If any ports are connected to other switches, the switch participates in a fabric configuration.
•
Obtains a domain ID and assigns port addresses
•
Constructs unicast routing tables
•
Enables normal port operation
Supported HBAs and CNAs
NOTE:
CNAs apply to the FCoE Converged Network Switch only.
For a list of HBAs that have been tested and are known to work with the SAN switches, see the latest
version of the
HP StorageWorks SAN Design Reference Guide
, at
h
t
tp://w
w
w
.hp
.co
m/go/
s
ande
si
gngui
de
.
Technical specifications
92