HP StorageWorks MSA 2/8 HP StorageWorks Fabric Watch V3.1.x/4.1.x User Guide ( - Page 127
Synchronization Loss Area Messages, Probable Cause, Recommended Action
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Responding to Fabric Watch Messages Message Description Troubleshooting FW-BELOW, 3, portLink (Port Link Failures ) is below low boundary. current value : Error(s)/minute. (normal) Explains that the number of link losses per minute that the port experiences has fallen below the low boundary. Provides the new value. This message is informational. Respond to this message as is appropriate to the particular policy of the end-user installation. Message Description Troubleshooting WARNING EXCEEDED, 3, portLink (Port Link Failures ) is exceeded boundary. current value : Error(s)/minute. (info) Explains that the number of link losses per minute has risen above or fallen below the acceptable range. Provides the new value. This message is informational. Respond to this message as is appropriate to the particular policy of the end-user installation. Message Description Troubleshooting FW-INBETWEEN, 3, portLink (Port Link Failures ) is between high and low boundaries. current value : Error(s)/minute. (info) Explains that the number of link losses per minute has changed from a value outside of the acceptable range to a value within the acceptable range. Provides the new value. This message is informational. Respond to this message as is appropriate to the particular policy of the end-user installation. Synchronization Loss Area Messages Probable Cause Loss of synchronization errors frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses. Recommended Action Check for problems with the appropriate SFP and cable. If you continue to experience sync loss errors, troubleshoot your HBA and contact your support representative. Fabric Watch Version 3.1.x/4.1.x User Guide 127