HP StorageWorks MSA 2/8 HP StorageWorks Fabric Watch V3.1.x/4.1.x User Guide ( - Page 145
Segmentation Changes Area Messages, Probable Cause
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Responding to Fabric Watch Messages Message Description Troubleshooting FW-BELOW, 3, fabricDI000 (Fabric Domain ID) is below low boundary. current value : DID Change(s). (info) Explains that the total number of Domain ID changes has fallen below the low boundary. Provides the new value. All Domain ID messages are informational. Respond to this message as is appropriate to the particular policy of the end-user installation. Message Description Troubleshooting WARNING EXCEEDED, 4, fabricDI000 (Fabric Domain ID) is exceeded boundary. current value : DID Change(s). (info) Explains that the total number of Domain ID changes has risen above or fallen below the acceptable range. Provides the new value. All Domain ID messages are informational. Respond to this message as is appropriate to the particular policy of the end-user installation. Incom Message Description Troubleshooting FW-INBETWEEN, 3, fabricDI000 (Fabric Domain ID) is between high & low boundaries. current value : DID Change(s). (info) Explains that the total number of Domain ID changes has changed from a value outside of the acceptable range to a value within the acceptable range. Provides the new value. All Domain ID messages are informational. Respond to this message as is appropriate to the particular policy of the end-user installation. Segmentation Changes Area Messages Probable Cause Segmentation changes may occur due to ■ Zone conflicts. ■ Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Incompatible parameters result in segmentation. This incompatibility rarely occurs. ■ Domain conflicts. ■ Segmentation of the principal link between two switches. Fabric Watch Version 3.1.x/4.1.x User Guide 145