HP StorageWorks MSA 2/8 HP StorageWorks Fabric Watch V3.1.x/4.1.x User Guide ( - Page 63
Enter, at the prompt to change the threshold boundary level., at the prompt to con Fabric
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Using Fabric Watch with Telnet 8. Enter 3 at the prompt to change the threshold boundary level. Example 1 : change behavior type 11 : change threshold alarm level 2 : change behavior interval 12 : change changed alarm 3 : change threshold boundary level 13 : change exceeded alarm 4 : change custom unit 14 : change below alarm 5 : change custom time base 6 : change custom low 7 : change custom high 15 : change above alarm 16 : change inBetween alarm 17 : apply threshold alarm changes 8 : change custom buffer 18 : cancel threshold alarm changes 9 : apply threshold boundary changes 19 : return to previous page 10 : cancel threshold boundary changes Select choice => : (1..19) [19] 3 1 : Default 2 : custom Enter boundary level type => : (1..2) [1] 9. Enter 2 at the prompt to configure Fabric Watch to use your custom settings. Example 1 : Default 2 : custom Enter boundary level type => : (1..2) [1] 2 Index ThresholdName BehaviorType BehaviorInt 1 envTemp001 Triggered 1 2 envTemp002 Triggered 1 Threshold boundary level is set at : Custom Default Custom Unit C C Time base Low 0 60 High 67 67 BufSize 10 3 Fabric Watch Version 3.1.x/4.1.x User Guide 63