Icom VE-PG3 Instruction Manual - Page 121
SelCall in Bridge Connection
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
5 BRIDGE MODE SETTING SCREEN 7. [Bridge Connection] Menu (continued) [Bridge Connection]-[SelCall in Bridge Connection] MSelCall in Bridge Connection Configure the rule of individual Callee destination in the Bridge mode. The commnucation route is connected according to this setting. q Index The index assigned for the entry. Setting range: "1" to "1000" (Default: 1) w Name You can name the setting. (Up to 31 characters) e Call Type Select the type of call. (Default: Individual) • Individual : C all only specified radio. • Group : C all all radios that belong to the specified group. • All : C all all radios. r Prefix ID Enter the prefix ID of the SelCall destination. ID range: (Depending on the system mode) t Destination ID Enter the ID of the SelCall destination. ID range: (Depending on the system mode) Destination SelCall in Bridge Connection y Address Enter the VE-PG3's IP address which is connected to the radio that communicates with the SelCall destination. uPort Number Enter the VE-PG3's port number which is connected to the radio that communicates with the SelCall destination. i