Icom VE-PG3 Instruction Manual - Page 147
MEXT Input Control continued, selected in [Input Connection Port].
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] Menu M EXT Input Control (continued) [Port Settings]-[EXT Input 1 (EXT1)/EXT Input 2 (EXT2)] w Valid Timing e Power for the Microphone � r Reference Level Select the condition to send the audio signal. (Default: Control input detect) • Always-on Always sends the audio signal to the destination selected in [Input Connection Port]. • W hen "IP Network" or "Emergency" is selected in [Input Connection Port], this option cannot be selected. • Audio Input Detect When an audio signal is input, sends the audio signal to the destination selected in [Input Connection Port]. • Control Input Detect When the control signal is input, sends the audio signal to the destination selected in [Input Connection Port]. Select "Enable" to supply the voltage to the microphone connected to A3/A4 terminal (Audio input) microphone. (Default: Disable) Select the input line A3/A4 terminal (Audio input) sensitivity from [-10 dBs] and [-40 dBs] (0 dBs=0.775 Vrms). (Default: -10dBs) • The sensitivity differs depending on the microphone. [EXT2] port A1~A4 B1~B4 C1~C4 A1~A4 B1~B4 C1~C4 A1~A4 B1~B4 C1~C4 A1~A4 B1~B4 C1~C4 VE-PG3 (Rear view) • See Section 8 for port details. 5-84 [EXT1] port