Icom VE-PG3 Instruction Manual - Page 270
Voice Transmission Control to the EXT Device EXT Output
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[EXT Output 1 (EXT1)/ EXT Output 2 (EXT2)] MVoice Transmission Control to the EXT Device (EXT Output) Set the audio output control details for the [EX1T]/[EXT2] port. q Attack Time w Release Time e Voice Delay r Voice Threshold Enter the TX attack time. Range: 5 to 500 milliseconds in 5 millisecond step(Default: 50) It is the delay time before the VOX switch turns ON after an audio signal is received through the network. Select the RX delay time in 5 millisecond step. Range: 5 to 2000 milliseconds in 5 milliseconds step (Default: 500) It is the delay time for the VOX switch to turn OFF after not audio signal is received through the network. Set the audio signal buffer time to prevent intermittent audio. Range: 0 to 500 milliseconds in 5 millisecond step (Default: 5) Set the voice threshold level.(Default: 40) Range: 0 to 100 % The VOX function automatically switches between receive and transmit according to this threshold level. Lower values make the VOX function more sensitive to the audio signal. 6-91