Icom VE-PG3 Instruction Manual - Page 289
Forced Disconnect, Enter the time period to be forced to stop the transmission. When the set time
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) MRelease Timer Configure the timer details for call, forced disconnection and so on. [Port Settings]-[Bridge 1-Bridge 4] q Call Cancel Timer w No Voice Release Timer � e DID Disconnect Timer �� Forced Disconnect r Forced Disconnect Timer Enter the time period to cancel the calling. When the set time has passed without the response from the IP phone, the transmission is cancelled. (Default: 15) Range: "0 (OFF)," "5" to"60" (sec.) Enter the time period to stop the transmission. When the set time has passed with no audio signal, the transmission is stopped. (Default: 15) Range: "0 (OFF)," "5" to"600" (sec.) The waiting time for DID (Direct Inward Dialing) function. When no dial input is detected for this time period, the communication route will be disconnected. (Default: 60) Range: "0 (OFF)" to "120" (sec.) • The DID (Direct Inward Dialing) function allows you to call the specified radio from an IP phone. Enter the time period to be forced to stop the transmission. When the set time has passed, the transmission is stopped even when the communication is going on. (Default: 10) Range: "0 (OFF)," "5" to"120" (minutes) 6-110