Icom VE-PG3 Instruction Manual - Page 266
Default: Full Duplex, Select the communication type.
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) MSerial Communication Set the serial communication details. [Port Settings]-[EXT Output 1 (EXT1)/ EXT Output 2 (EXT2)] *Appears only when "Enable" is selected in [Serial Communication]. qSerial Communication �� Select "Enable" to use the serial communication.(Default: Disable) wTCP Port Number ��� Enter the port number between 1024 and 65535. (Default: 50002) e Communication Control � Select the communication type.(Default: Full Duplex) r Signal Level Select the serial communication line signal level. (Default: ±5 V (RS-232C)) 6-87
6
CONVERTER MODE SETTING SCREEN
6-87
9. [Port Settings] Menu (continued)
[Port Settings]–[EXT Output 1 (EXT1)/
EXT Output 2 (EXT2)]
M
Serial Communication
Set the serial communication details.
q
Serial Communication ……
Select “Enable” to use the serial communication.
(Default: Disable)
w
TCP Port Number ………
Enter the port number between 1024 and 65535.
(Default: 50002)
e
Communication Control …
Select the communication type.
(Default: Full Duplex)
r
Signal Level ………………
Select the serial communication line signal level.
(Default: ±5 V (RS-232C))
*Appears only when “Enable” is selected in [Serial Communication].