Icom VE-PG3 Instruction Manual - Page 316
Input/Output Digital Gain] doesn't work., Troubleshooting continued
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
8 FOR YOUR INFORMATION 1. Troubleshooting (continued) Cannot cancel an outgoing call. The VE-PG3 cannot recognize the calling status. -> Select "Enable" in [SIP 183 Support] on the [VoIP Expansion] screen in the [Expansion] menu. [Input/Output Digital Gain] doesn't work. Internal codec is not used. -> Use [Input/Output Analog Gain] to adjust the signal level. When the Combined mode is selected, the output audio signal from the [OUT] port does not fade-in or fade-out. The [EXT1]/[EXT2] port setting is wrong. -> Set the [EXT Input] port's connect destination to [EXT Output]. The Mixing function doesn't work AMBE+2 is used as the codec. -> The Mixing function works on the only G.711 codec. Malfunction in use of the Mixing function The communication route is duplicated. -> Check the Mixing function setting. The VE-PG3 cannot automatically update the firmware. • The Ethernet cable is not properly connected to the VE-PG3. -> Properly connect the Ethernet cable to the VE-PG3. • The VE-PG3 is not connected to internet. -> Set the VE-PG3 properly to connect to internet. • The firewall is running. -> Stop the firewall. If you want to stop the firewall, ask your network administrator for details. 8-3