Icom VE-PG3 Instruction Manual - Page 285
When the same DTMF signal key is selected in [PTT-ON tone] and [PTT, OFF Tone]
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) M Bridge Control (continued) [Port Settings]-[Bridge 1-Bridge 4] !0 PTT-ON Tone !1 PTT-OFF Tone Select the DTMF signal (0 to 9, #, *) to control the radio from the SIP phone. (Default: 0) • Dialing the callee extension number, and then push the set button to control the callee radio to transmit. Select the DTMF signal (0 to 9, #, *) to control the radio from the SIP phone. (Default: 0) • While communicating with a radio, push the set button to control the callee radio to receive. When the same DTMF signal (key) is selected in [PTT-ON tone] and [PTTOFF Tone], each pushing PTT toggles the TX and RX. 6-106
M
Bridge Control (continued)
!0
PTT-ON Tone ……………
Select the DTMF signal (0 to 9, #, *) to control the radio from the SIP phone.
(Default: 0)
• Dialing the callee extension number, and then push the set button to control
the callee radio to transmit.
!1
PTT-OFF Tone ……………
Select the DTMF signal (0 to 9, #, *) to control the radio from the SIP phone.
(Default: 0)
• While communicating with a radio, push the set button to control the callee
radio to receive.
When the same DTMF signal (key) is selected in [PTT-ON tone] and [PTT-
OFF Tone], each pushing PTT toggles the TX and RX.
6
CONVERTER MODE SETTING SCREEN
6-106
9. [Port Settings] Menu (continued)
[Port Settings]–[Bridge 1–Bridge 4]