Icom VE-PG3 Instruction Manual - Page 130
Send and Receive Change, Default: TRX1=50000, TRX2=50001
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] Menu (continued) [Port Settings]-[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)] M Transceiver 1 (TRX1)/Transceiver 2 (TRX2)(continued) "General Setting" *Appears only when "Enable" is selected in [Power Detection]. **Appears only when "Enable" is selected in [Serial Communication]. o Send and Receive Change � Select "Enable" for one common usage line as the MIC input (A1 terminal) and AF output (A3 terminal). (Default: Disable) If your radio commonly uses one line as the MIC input and AF output, select "Enable". !0Serial Communication �� Select "Enable" to use the serial communication.(Default: Disable) !1TCP Port Number ��� Enter the port number between 1024 and 65535. (Default: TRX1=50000, TRX2=50001) !2 Communication Control � Select the communication type.(Default: Full duplex) !3 Signal Level Select the serial communication line signal level. (Default: ±5 V (RS-232C)) 5-67