Icom VE-PG3 Instruction Manual - Page 319

8 FOR YOUR INFORMATION 4. Specifications NOTE: All sepecifications are the subject to change without notice. M General Power supply : DC12 V ±10% [Polarity: ] 16W maximum (with the supplied AC adaptor) Usable condition : Temperature 0 to 40°C; +32 to +104°F, Humidity 5-95% (At no condensation) Dimension : Approximately 232 (W) × 38 (H) × 168 (D) mm; 9.1 (W) × 1.5 (H) × 6.6 (D) in (objections not included) Weight : Approximately 800 g; 28.2 oz (without the supplied accessory not included) Regulatory Compliance : FCC (Part 15 Class B/Part 68) TIA868-B ICES-003 ICCS-03 CE Mark ETSI ES 203 021 ETSI EG 201 121 (Advisory Note) Interface : LEDs (PWR/MSG, WAN, V/RoIP, D-TRX, TRX(1/2), EXT(1/2)), Buttons (UPDATE, INIT) [USB] ports (USB2.0)×2 M Communication Interfaces [WAN] port : [WAN] port (RJ-45 type)×1 (Auto MDI/MDI-X) • Based on IEEE802.3/10BASE-T • Based on IEEE802.3u/100BASE-TX [LAN] port : [LAN] port (RJ-45 type)×1 (Auto MDI/MDI-X) • Based on IEEE802.3/10BASE-T • Based on IEEE802.3u/100BASE-TX [TRX] (1/2) port : Analog audio/Transmit control 2.54 mm (0.1 in) pitch quick connector (4 terminals ×3)×2 [EXT] (1/2) port : Audio input -10 dBs/-40 dBs selectable Input impedance Approximately 10 kΩ unbalance Audio output 0 dBs/-20 dBs selectable 600 Ω load unbalance/8 Ω 1 W speaker Control input Low voltage contacts (DC3.3 V/ 1 mA)/ Voltage input (3-16 V) Control output No voltage contacts (30 V/ 500 mA)/Open collector (3-16 V 10 mA) Connectors 2.54 mm (0.1 in) pitch quick connector (4 terminals ×3)×2 [LINE] port : RJ-11 ×2 [PHONE] port : RJ-11 ×1 Communication rate : [WAN] port 10/100 Mbps (Automatic switching/Full duplex) [LAN] port 10/100 Mbps (Automatic switching/Full duplex) Relay protocol : Only IPv4 for routing Signaling protocol : SIP Codec : G.711u, AMBE+2 8-6