Icom VE-PG3 Instruction Manual - Page 191
Default: Disable, The subnet mask for the IP address set on [IP Pool Start Address]
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
6 CONVERTER MODE SETTING SCREEN 4. [Network] Menu (continued) MDHCP Server Configure the DHCP details. [Network]-[DHCP Server] q DHCP Server w IP Pool Start Address �� e Pool Size r Subnet Mask t Lease Time y Domain Name Select "Enable" to use the DHCP. (Default: Disable) Enter the starting address. (Default: 192.168.0.10) Enter the number of IP address that provides the DHCP server. (Default: 30) Range: 0 to 128 The subnet mask for the IP address set on [IP Pool Start Address](w). (Default: 255.255.255.0) Enter the valid release time of the IP address provided by the DHCP server. Range: 1 to 9999 (hour) (Default: 72) Enter the domain name (up to 127 characters) if required. The DHCP server informs the domain to the connected device. 6-12
6
CONVERTER MODE SETTING SCREEN
6-12
4. [Network] Menu (continued)
M
DHCP Server
Configure the DHCP details.
q
DHCP Server ……………
Select “Enable” to use the DHCP.
(Default: Disable)
w
IP Pool Start Address ……
Enter the starting address.
(Default: 192.168.0.10)
e
Pool Size …………………
Enter the number of IP address that provides the DHCP server.
(Default: 30)
Range: 0 to 128
r
Subnet Mask ………………
The subnet mask for the IP address set on [IP Pool Start Address](
w
).
(Default: 255.255.255.0)
t
Lease Time ………………
Enter the valid release time of the IP address provided by the DHCP server.
Range: 1 to 9999 (hour)
(Default: 72)
y
Domain Name ……………
Enter the domain name (up to 127 characters) if required.
The DHCP server informs the domain to the connected device.
[Network]–[DHCP Server]