Icom VE-PG3 Instruction Manual - Page 170
MSNMP, Enter a contact information of up to 127 characters to be displayed on
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
5 BRIDGE MODE SETTING SCREEN 10. [Management] Menu (continued) [Management]-[SNMP] M SNMP Set the SNMP (Simple Network Management Protocol) when you monitor the protocol, to automatically monitor using the SNMP monitor. qSNMP Select whether to enable or disable the SNMP monitor function. (Default: Enable) • If you select "Enable," you can monitor the VE-PG3's information with the SNMP monitor. w Get Community Set an ID of up to 31 characters, which is required for the access to the SNMP monitor. (Default: public) e System Location Enter a location name of up to 127 characters to be displayed on the SNMP monitor. • The SNMP monitor is compatible with MIB-II (RFC1213). r System Contact Enter a contact information of up to 127 characters to be displayed on the SNMP monitor. • The SNMP monitor is compatible with MIB-II (RFC1213). 5-107