Icom VE-PG3 Instruction Manual - Page 158
Control Output at the Start of Audio Output, Default: RTP synchronization
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] (continued) [Port Settings]-[EXT Output 1 (EXT1)/EXT Output 2 (EXT2)] MEXT Control Terminal Control Circuit Change:Relay Circuit Set the control signal output details for the [EX1T]/[EXT2] port. • This setting item appears when "Relay Circuit" is selected in [Control Circuit Change]. *Appears only when "RTP synchronization" is selected on [Control Output at the Start of Audio Output]. q Control Output at the Start of Audio Output Select the control signal output option. (Default: RTP synchronization) • Disable : Does not send the control signal. • RTP synchronization : Sends the control signal when RTP is received. • Regardless of the audio signal presence, the relay is activated while the RTP is received. w Release Time Select the RX delay time in 5 milliseconds step.(Default: 100) Range: 5 to 2000 milliseconds It is the delay time for the VOX switch to turn OFF after not audio signal is received through the network. e Voice Delay Set the audio signal buffer time to prevent intermittent audio in 5 milliseconds step.(Default: 5) Range: 0 to 500 milliseconds 5-95