Icom VE-PG3 Instruction Manual - Page 128
Port Settings] Menu continued, Transceiver Connection
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
5 BRIDGE MODE SETTING SCREEN 8. [Port Settings] Menu (continued) [Port Settings]-[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)] M Transceiver Connection "General Setting" The setting screen when "General Setting" is selected in [Transceiver Model]. *Appears only when "Enable" is selected in [Power Detection]. **Appears only when "Enable" is selected in [Serial Communication]. q TX Volume Offset to Transceiver: Adjust the VE-PG3's transmitting audio level that is sent to the connected transceiver between "15" and "-30" (dB). (Default: -22) w RX Volume Offset from Transceiver: Adjust the VE-PG3's audio level from the transceiver between "+26" to "-26" (dB). (Default: -24) e PTT Type Select the PTT circuit type.(Default: Single PTT) • Single PTT: T he speaker line and PTT input line are separated. • Superimposed PTT: T he PTT input line is superimposed on the MIC input (A1 terminal). r PTT Logic Select the PTT logic. (Default: Low) • High: PTT line becomes "High" when [PTT] is pushed. (Active High) • Low: PTT line becomes "Low" when [PTT] is pushed. (Active Low) 5-65