Icom VE-PG3 Instruction Manual - Page 18

2 BRIDGE MODE APPLICATION 4. Using the Mixing funcrion The mixing function mixes conversations from different Areas. As shown in the figure below, the Area A radio users can talk to the Area B and relayed to the Area C. • In this example, the audio signal of [TRX1] port and [TRX2] port (VE-PG3 in Area B) are mixed as illustrated below. Area A VE-PG3 (192.168.0.2) [TRX1] Unicast IP Network Area B VE-PG3 (192.168.0.3) Mixing [TRX1] [TRX2] Unicast Area C VE-PG3 (192.168.0.4) IP Network [TRX2] Radio A Radio B Radio D Radio C Radio A1 Radio B1 Radio D1 Radio C1 An example of communication with the Mixing function 1. Configuration Access the VE-PG3 setting screen, and set the items as shown below. • Configure the VE-PG3 in Area A and C, referring to "operation in the Unicast mode." VE-PG3 (Area B) Menu Item Setting Screen Operating Mode Operating Mode Setting Item Operating Mode IP Communication Mode Mixing Group* Port Settings Transceiver 1 (TRX1) Transceiver 2 (TRX2) Transceiver Model: Transceiver Model: Item Name Value Operating Mode Bridge IP Communication Mode Unicast Transceiver 1(TRX1), Transceiver2(TRX2) Transceiver Model IC-F5060/F6060 Transceiver Model IC-F5060/F6060 Bridge Connection Bridge Connection Point Bridge Connection Point Connection IP Address TRX1:192.168.0.2 List of Bridge Connection Point Entries Connection Status TRX2:192.168.0.4 During Transmit *Enter the round marks to the "Group1" field in the Transceiver 1 (TRX1) and Transceiver 2 (TRX2) rows. 2-8