Icom VE-PG3 Instruction Manual - Page 315

8

FOR YOUR INFORMATION

8-2

If the VE-PG3 seems to be malfunctioning, please check the followings before sending it to the service center.

1. Troubleshooting

The [PWR/MSG] LED does not light.

• The supplied AC adapter is not connected to the VE-PG3.

-> Verify that the AC adaptor is securely connected.

• The AC adapter is connected to the same AC outlet with the PC.

-> Connect the AC adapter to a different AC outlet.

The [LAN] LED does not light.

• The Ethernet cable is not properly connected to the VE-PG3.

-> Verify that the Ethernet cable is securely connected.

• The HUB or PC is turned OFF.

-> Turn ON the HUB or PC.

You cannot access the VE-PG3’s setting screen.

• The PC’s IP address is incorrect.

-> Set the fixed VE-PG3’s IP address after you set the VE-PG3 to default setting.

• The network part of PC’s IP address is different from the VE-PG3.

-> Set the network part of PC’s IP address to same as the VE-PG3.

• A proxy server is used for the web browser setting.

-> Set the web browser’s proxy server setting to OFF.

Click the “Tools” in the web browser menu, and then click “Internet option.”

Click the “Connections” tab, and click [LAN settings], and then confirm there is no check mark in “Automatically

detect settings” and “Use a proxy server for your LAN (These settings will not apply to dial-up on VPN connec-

tion).

The VE-PG3’s setting screen is not properly displayed.

• The javascript or cookie functions are turned OFF.

-> Set the javascript and cookie functions to ON.

• Your version of Microsoft Internet Explorer is 8 or earlier, or your browser is other than Internet Explorer.

-> Use Microsoft Internet Explorer 9 or later.

The receiving sound breaks up while operating in the Bridge's Multicast mode.

Two or more transceivers that are connected with the different VE-PG3s are transmitting at the same time.

-> Use only one VE-PG3 in the Always-on connection mode.

-> Set the Always-on connection mode to disable.

Section	Page
FRONT COVER	1
1. BEFORE USING THE VE-PG3	5
2. BRIDGE MODE APPLICATION	11
1. Operation in the Multicast mode	12
1. Configuration	12
2. Connection	13
3. Operation	14
2. Operation in the Unicast mode	15
1. Configuration	15
2. Connection	16
3. Operation	17
4. Using the Mixing funcrion	18
1. Configuration	18
2. Connection	19
3. Operation	20
5. Operating in the NXDN Conventional mode	21
1. UC-FR5000 configuration	21
2. VE-PG3 configuration	22
3. Connection	23
4. Operation	24
3. CONVERTER MODE APPLICATION	25
1. Communication in the Peer to Peer mode	26
1. Configuration	26
2. Connection	27
3. Operation	28
2. Using with an in-house sound system	29
1. Configuration	30
1. Configuration (continued)	31
2. Connection	32
3. Operation	33
3. Using with an external headset	34
1. Configuration	35
1. Configuration (continued)	36
2. Connection	37
3. Operation	38
4. Making an emergency announcement	39
1. Configuration	41
1. Configuration (continued)	42
2. Connection	43
3. Operation	44
5. Emergency Notice	45
1. Configuration	46
2. Connection	48
3. Operation	50
6.Operating in the NXDN Trunking mode	51
1. UC-FR5000 configuration	51
2. VE-PG3 configuration	52
3. Connection	53
4. Operation	54
7. Connecting to the Bridge mode's VE-PG3	55
1. Configuration	55
1. Configuration	56
2. Connection	57
3. Operation	58
4. ANALOG TELEPHONE APPLICATION	59
Telephone function	60
1. Configuration	60
2. Connection	61
3. Operation	62
5. BRIDGE MODE SETTING SCREEN	63
6. CONVERTER MODE SETTING SCREEN	180
7. MAINTENANCE	302
8. FOR YOUR INFORMATION	314

Icom VE-PG3 Instruction Manual - Page 315

Troubleshooting, The [PWR/MSG] LED does not light., You cannot access the VE-PG3's setting screen.

Page 315 highlights