Icom VE-PG3 Instruction Manual - Page 46

3 CONVERTER MODE APPLICATION 5. Emergency Notice (continued) 1. Configuration Access the VE-PG3 setting screen, and set the items as shown below. VE-PG3 (Area A) Menu Item Setting Screen Setting Item Item Name Value Operating Mode Operating Mode Operating Mode Operating Mode Converter EXT I/O Port Mode EXT I/O Port Mode Separate V/RoIP IP Line SIP Server IP Phone Number 32 (Extension Number set in the VE-PG3 in area B) SIP Server Address 192.168.0.3 (IP address set in the VE-PG3 in area B) SIP Service Domain 192.168.0.3 (Extension Domain set in the VE-PG3 in area B) User ID 32 (Extension Number set in the VE-PG3 in area B) Password (Password set in the VE-PG3 in area B) Extension Connect List of SIP Server Entries Connection Status Extension Connect Extension Extension Number (TRX1) Port Type During Transmit 301 Transceiver 1 (TRX1) (EXT1) Extension Number 302 Port Type EXT I/O 1 (EXT1) Incoming Call V/RoIP Incoming Call Setting Receive Port 32:302 (EXT1) Port Settings Transceiver 1 (TRX1) Transceiver Model: Transceiver Model IC-F5060/F6060 (default) EXT Input 1 (EXT1) EXT Control Terminal Input Connection Port Ext Output Valid Timing Always-on Connection Reference Level (Depending on the connected device.) Input Analog Gain Input Digital Gain EXT Output 1 (EXT1) EXT Control Terminal Reference Level (Depending on the connected device.) Output Analog Gain Output Digital Gain Fade-out (Depending on the situation.) Fade-in Announce Tone Start Tone (Depending on the situation.) End Tone Announce Tone Volume V/RoIP Control Send Connect Success Tone to Telephone (Depending on the situation.) Notice Tone Volume Expansion Release Timer EXT Input 2 (EXT2) EXT Control Terminal EXT Control Terminal Priority Control Priority Level Emergency Notice Emergency Notice No Voice Release Timer 5 (sec.) (Depending on the situation.) Input Connection Port Emargency Valid Timing Control Data Detection Input Type (Depending on the situation.) Event ON Time Event OFF Time Control Input Detection (Depending on the connected device.) Control Input Pull-up Setting Individual Calling Priority Transceiver 1 (TRX1) Enable EXT I/O 1 (EXT1) Enable 3-22 (Continued on the next page.)