Icom VE-PG3 Instruction Manual - Page 238
Transceiver 1 TRX1/Transceiver 2 TRX2 continued
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)] M Transceiver 1 (TRX1)/Transceiver 2 (TRX2) (continued) *Appears only when "Enable" is selected in [Serial Communication]. t SQL Type Select the squelch signal type.(Default: Single SQL) • Single SQL: T he squelch signal is separately input. • Superposition SQL: T he squelch signal is superimposed on the MIC input line. y SQL Logic Select the squelch detection type.(Default: High) • High: The squelch line becomes "High" when the VE-PG3 detects the receiving signal. (Active High) • Low: The squelch line becomes "Low" when the VE-PG3 detects the receiv- ing signal. (Active Low) u Power Detection Select "Enable" to detect the power status (ON/OFF) of the radio. (Default: Enable) i Send and Receive Change Select "Enable" to the commonly used line as the MIC input (A1 terminal) and audio output (A3 terminal). (Default: Disable) If your radio commonly uses one line as the MIC input and AF output, select "Enable". oSerial Communication �� Select "Enable" to use the serial communication.(Default: Disable) !0TCP Port Number ��� Enter the port number between 1024 and 65535. (Default: 50000) !1 Communication Control � Select the communication type.(Default: Full duplex) !2 Signal Level Select the serial communication line signal level. (Default: ±5 V (RS-232C)) 6-59