Icom VE-PG3 Instruction Manual - Page 269
MEXT Control Terminal EXT Output, EXT Control Output Pattern
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[EXT Output 1 (EXT1)/ EXT Output 2 (EXT2)] MEXT Control Terminal (EXT Output) Set the details of the control signal from the[ EXT1]/[EXT2] port. • These items appear when [Relay Circuit] is selected in [Control Circuit Switching]. qControl Output at the Start of Audio Output Select "Enable" to output the control signal when the audio signal is output. (Default: Enable) wEXT Control Output Pattern Select the control signal input condition. (Default: Momentary) • Momentary Connects the B1/B2 terminals (Relay circuit) only while the event is detected. • One-shot C onnects the B1/B2 terminals (Relay circuit) while the event is detected for the time period set in [Event ON time] (e). • Disconnects the terminals after the time period set in [Event OFF Time] (r) has passed. e Event ON Time Select the delay time until the event is detected. (Default: 1) rEvent OFF Time Select the delay time until the B1/B2 terminals (Relay circuit) is disconnected. (Default: 1) 6-90