Icom VE-PG3 Instruction Manual - Page 284
Bridge Control continued
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) M Bridge Control (continued) [Port Settings]-[Bridge 1-Bridge 4] y Disconnect Notice Tone � Select "Tone 1" to "Tone 3" to notify that the IP phone's handset is put on. (Default: Notice Tone 3) u Send Connect Failure Tone Select "Tone 1" to "Tone 3" to notify that the calling IP phone is not available. (Default: Notice Tone 3) i Notice Tone Volume ��� Select the tone level for above items. Range:"+6" to"-12" (dB) (Default: 0) PTT Control Type from the Telephone o PTT Control Type Select the signal type to be used for TX control. (Default: VOX) • If [VOX] is selected, the communication route is connected when an audio input is detected. 6-105
6
CONVERTER MODE SETTING SCREEN
6-105
9. [Port Settings] Menu (continued)
M
Bridge Control (continued)
y
Disconnect Notice Tone …
Select “Tone 1” to “Tone 3” to notify that the IP phone’s handset is put on.
(Default: Notice Tone 3)
u
Send Connect Failure Tone
Select “Tone 1” to “Tone 3” to notify that the calling IP phone is not available.
(Default: Notice Tone 3)
i
Notice Tone Volume ………
Select the tone level for above items.
(Default: 0)
Range:“+6” to“–12" (dB)
PTT Control Type from the Telephone
o
PTT Control Type …………
Select the signal type to be used for TX control.
(Default: VOX)
• If [VOX] is selected, the communication route is connected when an audio
input is detected.
[Port Settings]–[Bridge 1–Bridge 4]