Icom VE-PG3 Instruction Manual - Page 286
Voice Transmission Control to a Bridge Connection, Range: 5 to 2000 milliseconds
View all Icom VE-PG3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
6 CONVERTER MODE SETTING SCREEN 9. [Port Settings] Menu (continued) [Port Settings]-[Bridge 1-Bridge 4] MVoice Transmission Control to a Bridge Connection The VOX (voice operated transmission) function automatically switches the connected transceiver to transmit, when the VE-PG3 receives the audio signal through the network. q Attack Time w Release Time e Voice Delay r Voice Threshold Enter the TX attack time in 5 millisecond step. It is the delay time before the VOX switch turns ON after an audio signal is received through the network. IP Communication Mode: Unicast (Default: 50) IP Communication Mode: Multicast (Default: 10) Range: 5 to 500 milliseconds Select the RX delay time in 5 millisecond step. The time is the delay for the VOX switch to turn OFF after no audio signal is received through the network. IP Communication Mode: Unicast (Default: 500) IP Communication Mode: Multicast (Default: 2000) Range: 5 to 2000 milliseconds Set the audio signal buffer time to prevent intermittent audio in 5 millisecond step. IP Communication Mode: Unicast (Default: 200) IP Communication Mode: Multicast (Default: 500) Range: 0 to 500 milliseconds Set the voice threshold level. The VOX function automatically switches between receive and transmit according to this threshold level. IP Communication Mode: Unicast (Default: 40) IP Communication Mode: Multicast (Default: 100) Range: 0 to 100 % • L ower values make the VOX function more sensitive to the audio signal. 6-107